KTWO EVO VERTICAL BEATER DISCHARGE MUCK SPREADER RANGE 

The Ktwo Evo range of twin vertical beater rear discharge muck spreaders are designed to cope with the most demanding conditions whilst at the same time providing extra accuracy and the highest outputs available. Capable of spreading a wide range of materials from sludge products to chicken litter, these spreaders offer a versatility and build quality that is unique to the Ktwo Evo.

Available in capacities of 14–36 tonnes (21.5–36.3 m3) and with a range of optional extras, these machines also feature an enhanced standard specification.

EVO 1400

• 7.8 cubic metre capacity
• 21.5 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axle with 420x180mm brakes
  
• 4 x 16mm marine chains – 128 tonne breaking strain
• 75mm diamater floor drive shaft with 6 tooth sprockets
• 580/70 R38 wheels

EVO 1600

• 9.0 cubic metre capacity
• 23.5 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axle with 420x180mm brakes
  
• 4 x 16mm marine chains – 128 tonne breaking strain
• 75mm diamater floor drive shaft with 6 tooth sprockets
• 580/70 R38 wheels

EVO 1800 

• 10.8 cubic metre capacity
• 25.4 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axle with 420x180mm brakes
  
• 4 x 16mm marine chains – 128 tonne breaking strain
• 75mm diamater floor drive shaft with 6 tooth sprockets
• 650/65 R42 wheels

EVO 2400 TANDEM

• 21.5 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axles with  420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
  
• 75mm diamater floor drive shaft with 6 tooth sprockets
• 560/60 R22.5 wheels

EVO 2600 TANDEM

• 23.5 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axles with   420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
  
• 75mm   diamater floor drive shaft with 6 tooth sprockets
• 560/60 R22.5 wheels

EVO 2800 TANDEM

• 25.4 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axles with  420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
  
• 75mm    diamater floor drive shaft with 6 tooth sprockets
• 560/60 R22.5 wheels

EVO 3800 TRI AXLE

• 30.1 cubic metre capacity
• 1.60m wide body
• 10 stud Commercial axles   with 420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
  
• 75mm    diamater floor drive shaft with 6 tooth sprockets
• 560/60 R22.5 wheels

EVO 2620 TANDEM

• 29.7 cubic metre capacity
• 2m wide body
• 10 stud Commercial axles with 420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
• 75mm diamater floor drive shaft with 6 tooth sprockets
• 710/50 R26.5 wheels

EVO 3820 TRI AXLE

• 36.3 cubic metre capacity
• 2m wide body
• 10 stud Commercial axles with 420x180mm brakes
• 4 x 16mm marine chains – 128 tonne breaking strain
• 75mm diamater floor drive shaft with 6 tooth sprockets 710/50 R26.5   wheels

STANDARD SPECIFICATIONS

ROTORS

• Large 965mm diamater rotors
• Botoom spinner paddles with 1,250mm diameter to achieve spread patterns up to 20m wide
• Large rotor diameter gives a tip speed in excess of 40mph to give a fine shred
• Open flighted dynamically balanced rotors with our unique stepped rotor flight design for increased strength
• Rotor teeth made from hardened boron steel with 16mm bolts

AXLES

• 150mm square commercial axles
• 420 x 180 mm S-Cam brakes
• 35mm diameter brake cylinders
• Large wheels provide good flotation and traction in adverse conditions

HIGH SPECIFICATION

• Hydraulic slurry door
• Torque limiting slip clutch
• Wide angle front PTO shaft
• LED lights with automatic covers

CAPACITY

• High cubic capacities due to flared body sides
• 4 x 16mm floor chains for lower chain wear and reduced stress on the floor drive
• 6 tooth sprockets give less sprocket wear
• 75mm diameter floor drive shafts
• 1,600mm internal body width

QUALITY BUILD

• Monocoque body enables larger tyres to be fitted without increasing transport width
• Shot blasted paint preparation
• Two pack 130 micron paint finish